Mens Tungsten Wedding Bands

what is the difference in tungsten carbide and tungsten ? Do they shatter when the get in a car wreck or something comes down on the finger? As I want something that will shatter not bend when hit hard.

I need to know what mm/width I should get my soon2be husbands wedding band in? It will be a plain black tungsten band but I am unsure of the width. I am picking it for him, since he does not like going to try things on…..he says he trusts my judgment.

Anyway, he is 6 feet tall and wears a size 11 ring finger. I was thinking either a 6-8 mm but am unsure, he has large has(IMO). I just dont want it to be too overpowering or too small. What do you think?

What is the meaning/cost/significance of each metal for wedding bands?
I would like to know what each one means, and which you would recommend for wedding bands. Tell me your opinion please.

I’m aware of tungsten

I have a Tungsten wedding band, size 7 for men. It is silver/black, and I need to sell it. I tried at the pawn shops here, but they all say they don’t buy Tungsten rings, but they wouldn’t say why. I tried the jewelry store that I bought it at as well, but they don’t rebuy rings. Also, side question, is the cash4gold reasonable on buying ring settings without diamonds in them?
I haven’t tried Ebay or Craigslist as of yet. I wasn’t sure if there was somewhere I could have a better chance at getting back most of the cost with or not. It certainly wasn’t a cheap ring. Is the lighbulb answer serious? I wouldn’t think they would buy them. However, I wasn’t sure about specific stores, or metal factories, or something. Sort of like the cash4gold but for Tungsten or something. I know it’s a pretty specific metal so that could be why the pawn shops won’t buy it.

I wanted to buy my boyfriend a nice promise ring, but I know he has sensitive skin. Right now he has a sterling silver ring, but the metal bothers him a bit. He wears it, but I feel pretty bad.

I was thinking of buying a black Tungsten ring for him, but it has a nickle binding. Will that be okay for his skin? I don’t know much sensitive skin and different ring metals, so your advice is welcome.

Here’s the ring:

http://www.titaniumkay.com/Black-Tungsten-6mm-Comfort-Fit-Beveled-Wedding-Band-Ring-P103420.html

I was recently married, and I am having an issue with my wedding ring being too loose!
When we purchased it in the store, it was too loose, so we went back and measured my finger, and ordered a size a half a size smaller. It came in (which can’t be returned because of special order). It still felt a little loose, but they said your fingers will swell. Most of the time it fits ok, but moves around on my finger. If I put soap on my hands, or if I am in the shower and my fingers are just pointed down, it will fall off from the weight alone. It is tungsten, so it cannot be sized because it won’t hold solder.
I was wondering if anyone out there has had a similar experience, and what you did to correct it? I tried to find the rubber/plastic ring sizers, but since it is a male wedding band, most of the sizers are made for smaller rings…
Ideas? I would hate to lose it!
Thanks.

Is there a site online or a store where I can design a custom wedding band with inset stones on an alloyed nickel/black tungsten ring?
That wasn’t helpful, and a bit bratty. :/ I would need a link, I’ve been looking but can’t find one.
Thanks, but anyway it ends up alloyed (I probably remember the alloy wrong) I need some way to customize it.

The first one is stainless steel, the second is tungsten. Why is the stainless steel so much more expensive? I thought tungsten was better? Any advice would be great! Thanks so much.

http://www.mensweddingbands.com/products/TRITON-%252d-Stainless-Steel-11%252d2055S.html

http://www.titaniumkay.com/ORIS-Tungsten-Carbide-Wedding-Band-Ring-P102633.html

My fiance and I were looking at wedding bands last weekend, and just for an idea, we went to Kay since it’s right by our house. The lady at the counter told us that the Titanium and Tungsten bands are very popular, but they are known to crack fairly easily, and persuaded us to go with a gold wedding band. We have not decided yet. We were just getting an idea of what he likes. Has anyone out there ever heard of this happening with Titanium or Tungsten?

alright the wedding is on 9-4-2010 and i just got my fiancees ring in that i ordered off of ebay. a tungsten carbide ring. we read up on tungsten rings and everyone says that they run small so you need to get it a little bigger. well, i got it her usual size (5.5) thinking if anything it will be a little snug, and the band is too big! i dont know what to do. she has been married before so she still has her old ring so we were thinking of just using that one until we can get a good one custom fitted. suggestions? we live in houston, tx

Guys, which ring would you like?

I’m trying to find a wedding band for my boyfriend/fiancee. We’re pseudo-engaged I guess you could call it. I know, it’s strange, but we’re young so it’s like a pre-engagement. Anyway, I’m trying to find a ring for him, which of these would you like? Or, do you see another one you like better? I don’t care about price….

http://www.mensweddingbands.com/products/TRITON-%252d-Tungsten-%22Crofton%22.html

http://www.mensweddingbands.com/products/Triton-%252d-Cobalt-%22Lawan%22.html

http://www.mensweddingbands.com/products/Tayloright%C2%A9-14kt.-White-Gold-Handcrafted-%22Stockholm%22.html

http://www.mensweddingbands.com/products/Tayloright%C2%A9-10kt.-Yellow-Gold-Handcrafted-%22Brooklyn%22.html

http://www.mensweddingbands.com/products/Tayloright%C2%A9-10kt.-White-Gold-Handcrafted-%22Princeton%22.html

http://www.mensweddingbands.com/products/TRITON-%252d-Tungsten-%22Monroe%22.html

For some reason I’m leaning towards the last one, I feel like it looks like him….
Really I’m having trouble deciding between the crofton and the monroe….
He is the one that asked for it. So, please, don’t tell me it’s ridiculous. I didn’t even think of it. He ASKED me for one.
Look, I KNOW these are wedding bands. I KNOW men don’t wear them until they’re maried. He ASKED me for one. So please, just give your opinion on the rings. Thanks.

I’m trying to pick out a wedding band for my husband-to-be. A lot of people I know get titanium or tungsten rings instead of gold, but how durable are they? My fiance is a mechanic and works a lot in construction- so we’re looking for something that won’t be scratched and banged up easily.

I Have This Tungsten Carbide Wedding Band With A Carbon Fiber Part In The Middle, I Know The Shinny Tungsten Part Of The Ring Doesn’t Scratch Because it’s The Tungsten Part Of The Ring But What About The Middle Part? It’s Covered By Something That Looks Like Glass Or Something Else That’s Clear So You Can See The Carbon Fiber In The Middle, It Is Really Smooth Where It Goes From The Clear Glass To The Metal Tungsten Part Like If It Was Just 1 Material. Like I Can’t See Or Feel Any Rough Part Between Those 2 Materials When I Rub My Finger Over It. And I Have Tried To Scratch The Metal And The Glass Looking Thing With A Nail and Nothing Happens To Both, I Know That If I Hit The Tungsten Part With A Metal Sludge Hammer I Won’t Scratch Even A Bit But I’m Afraid If I Do A Scratch Test With The Middle Part It Will Scratch Since It’s Not Metal. So Can Someone Tell Me What The Middle Part Is And Why It Looks Like It’s Part Of The Tungsten? And Also If It’s Scratch-able? Here Is A Picture Of My Ring: http://i28.tinypic.com/5ma89e.jpg

First of all, before you criticize me for buying a tungsten band , I’m a Airplane Mechanic. In the past 10 years I have broken 1 gold ring at work, and destroyed about 3 titanium casual rings. So the local ring shop recommended tungsten because it does not scratch, so here they are. Now before u see the cheap price tag, just remember these bands are about 5 times as much if you buy em from a walk in store.

http://www.amazon.com/Polish-Beveled-Tungsten-Carbide-sizes/dp/B002EBLMI2/ref=pd_sbs_jw_1
( This one looks silver, but it’s darker, a very shiny gun Metal grey color almost )

http://www.amazon.com/Beveled-Edge-Polished-Tungsten-Carbide/dp/B0016P9D7O/ref=sr_1_35?ie=UTF8&s=jewelry&qid=1287394768&sr=1-35
( This one is a solid silver color, and has a higher shine. Also is not grey, solid silver color)

My fiance` and I broke up and now I’m trying to return his wedding band. However the jewelry store will not let me return it or give me store credit because I’ve had the band for over 100 days. He has never worn it and I don’t know how to get rid of it! It’s made of tungsten so I can’t even sell it to a gold dealer. Any suggestions?

I’m in the US military and i just got married. the ring i chose was a tungsten carbide wedding band, because of its strength and shine even after a rough life. well, come to find out, tungsten can’t be cut or bent and there are few ways to destroy it, in everyday life. they have attempts to destroy it on YouTube.com, if you’re ever interested in watching someone try to destroy different types of wedding bands. its highly unlikely but likely enough that it could pose a safety hazard in my work environment, and if (for instance) my hand was ever smashed and began swelling, I would basically lose my ring finger. so as an alternative, i was going to buy an alternative ring to wear at work. i was thinking black titanium (tungsten is 4x stronger than titanium). I love my tungsten ring and get compliments daily on how good it looks. its nice because I know in 10 years, i’ll still be getting compliments on how nice it looks.
I suppose I could just not wear my ring at work, but i am the type, now, that really feels like i need to keep it on me, all the time. so my question is, is wearing a second wedding band or alternate wedding and bad because its not the one my wife chose, or is this something I should bring up to the boss (my wife)? i’m pretty new to the marriage life, and i’m trying to do my best. My whole family (parents, aunts and uncles) are all divorced so i’m going to do my best with my wife and my own family.
thanks
Wow 7 hours and so many replies. Well, I guess I’ll take most all of your advice and talk to my wife, most likely buy a cheaper ring of her choosing, something I’ll wear when I’m at work, and take off when work really becomes serious work. If I lose it, it’s ok. If I can get 1 for a good price, I might buy a bunch.
It’s important for me to be a good husband to my wife. She is learning the hard way about being a military wife so I want to show her I support what we have just as much as she supports me. The more I think about it, I would almost not mind getting some easily removed metal that has little value. I wouldn’t even be against a rubber band, assuming it didn’t look like one (joke). I understand about the guys who have diamonds and what not but have them put on a tungsten carbide band and look at their hand. To me, it’s just as one-of-a-kind as the bond that brought the 2 of you together.

What material is better to go with for a mens wedding ring. Tungsten carbide or stainless steel. We need it to be very scratch resistant!

The buckles on most belts irritate the skin on his stomach. Titanium? Tungsten? Platinum?

okay i am going to get married within the next two weeks and i wanted to get a tungsten wedding band to match my soon to be husband’s but i am afraid it might not fit in with my white gold engagement ring. so i am asking if anyone has been in this situation before do they look good together?

I want to buy a tungsten wedding bands

Please tell me the name of the jewelry shop. Thank you.

Please don’t give me websites where I can order. I don’t want to purchase a Tungsten Carbide ring online since it can be troublesome (estimating ring size, shipping, risk of scam and damaged products, etc.). Besides, I want to see the rings in their actual form before buying them because some rings look good in the pictures but not in actual.

I absolutely love this ring. It’s sleek and durable.
My bf also really loves anything made of tungsten.
What do you think?

http://www.tungstenworld.com/ENIGMA-8mm-Black-Tungsten-Wedding-Band/
he never ever wears a watch.
he thinks they’re tacky.
Yeah, I know Love B.
that’s the only problem.
I don’t want anyone having to wonder weather he’s married
LaVaDa, yes it’s a very durable ring for men. follow the link on the top of my question and check it out.

My fiance and I would like something unique, not too modern/geometrical, in tungsten or titanium. We’d really like there to be some black in the design as well, maybe with a naturalistic or Celtic engraving? I know this is soooo specific, I’d also settle for something silver in color and just really unique.

Thanks!

ONE
http://www.tungstenworld.com/ENIGMA-8mm-Black-Tungsten-Wedding-Band/

TWO
http://www.tungstenworld.com/Tungsten-Carbide-Ring/MODERNO-8mm-Half-Round/

I love both.
I’ve also heard that tungsten original color is black.
If that’s the case, do I have to worry about the silver one tinting?
@ JNS – thank you!
lol you’re right, same rings!